Here's what you will need:
-foam board (I got mine from Lowe's and they will cut it down to the size that you need so they cut a whole board into 16x20 pieces so one board gave me 15 totals pieces!)
-spray adhesive (I used Loctite spray for general performance/ lightweight bonding)
-engineering prints from Staples and the sizes I ordered were 24x36 so I had enough overlap to fold and cover the sides of the foam
-packing tape
1. spray the foam with the adhesive and then wait 5-10 seconds for it to get a bit tacky **otherwise it makes the ink smear when you wipe across it to smooth it/get the air bubbles out** Also! Make sure to not over-do-it with the adhesive because otherwise it can soak through the prints since they are so thin and that's when it will smear...so definitely wait the 5-10 seconds!
2. flip it over and fold up the sides making sure you have sharp corners like wrapping a present and tape the folded edges across the back with packing tape!
3. And that's it! I used some Command strips to hang them since they are so lightweight and definitely do not need to be hung by nails!
![]() |
| the final products!!! I got the quote canvas from Janelle for Christmas And two of our favorite wedding pictures perfectly compliment it! |

No comments:
Post a Comment